Installing Wood Veneer to Avoid Bubbles and Cracks

For flexible paper-backed wood veneer was first introduced, most installers are treated as if it is plastic laminate, and she turned on the substrate, or surface contact with cement. That was the tried and true method, that is what she is doing. Unfortunately, if you like plastic laminate, wood veneer paper back often blisters and cracks treated. Not a desirable outcome.

For years experts tried to explain the problem. One theory was that interacts with the adhesive patchor glue. That made sense. Another theory was that the wood veneer laminate not accustomed to the installation environment, which means that it is too cold, too dry or too moist may, what about the problem.

Finally, new flexible veneer sheets, wood back on wood, two-ply and three-fold return, laminate back, and the unique "bubble back", came onto the market. While most flexible wood veneer was then at 5 million, or 10 millionThickness, the new sheet of veneer were as thick as 22 million. The people behind these flexible wood veneer sheets act as a vapor barrier and prevents the reaction to the adhesive patch. The bubbles and cracks? Gone.

When using 5-million. or 10-mil paper back wood veneer Your only option is to make use of hard glue as a contact cement. Hard adhesives "include urea-formaldehyde white or yellow PVA (wood glue) or epoxy. Hard adhesives work best with a vacuum cleaner or with a presscold or hot press. There is no chance of bubbles or cracks in the application of flexible wood veneer with these methods. The vacuum machine is best for uneven surfaces. The hot and cold presses are best with flat surface adhesions. If you are sure to cement instead of hard glue, then opt for the bubble of two layers of plywood or other flexible wood veneer or laminate back for the best results.

If you are worried about bubbles or cracks in the installation of flexible wood veneer, thenstop the wood veneer as a piece of plastic laminate. wood and plastic are very different materials. For a flat surface, use a hot or cold pressed. For uneven surfaces, use a vacuum pressure. Always use a "hard glue" in the application of wood veneer with a press conference made available. At a press conference is not an option, use a contact cement for an instant bond with either the flexible but stable, 22 million bubbles wood veneer or other two-ply or three-ply flexible andLaminate-back wood veneer grades. Cracks and bubbles is a thing of the past.